An Experience Area Workshop in Auckland. Registration decision After your professional conversation, the Assessment Panel makes a recommendation to the Board of the NZRAB, based on which the Board makes a decision as to whether you meet the applicable minimum standard for registration. This experience is documented in a case study that you submit with your registration application. Your case study should not include standard documents such as the Standard Conditions of Contract or requirement technical literature, but should include documents specific nzrab the project s. Copies of these documents should also be included in the two copies of your case study for the registration assessors to consider.
Without exception, applications will be returned if they do not comply, ie if too much material is included. Your case study can be made up of a minimum of 1 project and a maximum of three projects. Nzrab, the findings of these requirements cannot be compared directly, as these studies used different approaches to classify waste origins from construction projects. Extra time may be granted, if appropriate. If you have a recognised degree in architecture and the required work experience , then you are entitled to apply for registration as a New Zealand Architect via pathway 1.
Please follow the Application Form’s instructions carefully.
For those with a recognised qualification and the required work experience, please follow the four steps outlined below. Your case study must take into account the Minimum Standards for Initial Registration as an Architect.
Experience Areas are summarised below: Overview Experience Areas Related studh Share this. That is, your case study must in total cover each of the minimum standards only once.
Currently case studies can be presented either in hard copy or electronically as a PDF, although from the beginning of only PDF case studies will be accepted.
The procedure stkdy you: Experience Areas are summarised below: Some architects will not engage in a project where they are not in charge of contract administration.
All pages consecutively numbered.
Nzrab case study requirements
For information on what’s required to present a paper-based case study, go here. Without exception, applications will be returned if they do not comply, ie if too much material is included.
You must obtain permission from the relevant clients to use their projects in your Case Study, using the Case Study Release Letter Template. A case study release letter template is provided. Recording devices are not permitted in professional conversations. csse
New Zealand Registered Architects Board – Case Study Requirements for Pathway 1
Application Form Once your project record forms and your case study are ready, fill out the application form. You must bring your own laptop or other electronic device to the professional conversation with your Case Study on it, so you can show your Case Study nzrzb details therein on a monitor which will be connected to your device by a HDMI cable.
Decision criteria This experience is documented in a case study that you submit with your registration application.
This may include a minimum of one and a maximum of three projects of no more than 5 years old. Becoming a registered architect. If you have a recognised qualificiation and the required work experience, and you were registered in another jurisdiction at least seven years ago, please contact the NZRAB office at NZ 4 Create the site you want with Verio hosting plan options. If your projects do not adequately address any of the required standards, the Assessment Panel may pose questions of a more theoretical reqjirements hypothetical nature.
Becoming a registered architect
Extra time may be granted, if appropriate. Steve Cimino is the digital content manager at AIA. Your written commentary for all experience areas should be limited to a maximum total of 15, words including contents and headings, etc but excluding appendices. Where more than one project is submitted, a summary sheet in tabular form must be included clearly identifying the standards covered under each project.
New Zealand Registered Architects Board – Pathway 1 (former)
Your case study should not include nzrqb documents such as the Standard Conditions of Contract or standard technical literature, but should include documents specific to the project s. The two hard copies of the case study are required for the registration assessors.
However, if aesthetics and design originality are not priorities for you there may be other options that fit case with your vision and budget.
In addition, in a separate envelope, you need to provide the following documents: Graduates must complete years of on-the-job practical work experience before they can apply to become a Registered Architect. Back to the top. Registration decision After your professional conversation, the Assessment Panel makes a recommendation to the Board of the NZRAB, based on which the Board makes a decision as to whether you meet the applicable casee standard for registration.